Section 14 (Clutch System): Flywheel: Inspection

WARNING: This page is about a different variant/trim than selected.

NOTE: The illustration below is for a Turbo model. However, perform the same procedures for the Non-turbo model.

CAUTION: Since this bearing is grease-sealed and is a non-lubrication type, do not wash with gasoline or any solvents.

Damage on sliding surface of facing and the ring gear
If defective, replace the flywheel.

Fig 1: Identifying Flywheel And Ring Gear
Courtesy of SUBARU OF AMERICA, INC.
Smoothness of rotation
Rotate the ball bearing while applying pressure in the thrust direction.
If noise or excessive play is noted, replace the flywheel.