Extension Case: Assembly

WARNING: This page is about a different variant/trim than selected.

Press-fit the new oil seal using ST and the press.
ST 498057300 INSTALLER
Press-fit the dust cover.
Insert the transfer clutch assembly, spring retainer, return spring and clutch spring retainer.

Fig 1: Identifying Transfer Clutch Assembly, Spring Retainer, Return Spring And Clutch Spring Retainer
Courtesy of SUBARU OF AMERICA, INC.
Using the ST and compressor, install the snap ring.
ST 18762AA000 COMPRESSOR SPECIAL TOOL

Fig 2: Installing Snap Ring Using ST (18762AA000 Compressor Special Tool)
Courtesy of SUBARU OF AMERICA, INC.
Install the transfer clutch. < Ref. to INSTALLATION , Transfer Clutch. >
Install the multi-plate hub assembly.