LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2008 >> Outback Base, Automatic >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Rear Suspension System >> Rear Arm >> Assembly >> Front Bushing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Bushing

  1. Set the ST A with the larger side of its inner diameter turned upward.
  2. Set the rear arm with the vehicle inner side of arm turned downward.
  3. Place the bushing on rear arm as shown in the figure.
  4. Place the ST B on the bushing, and press-fit until each edge surface of bushing and rear arm is aligned.

    ST A 20099AE020 INSTALLER & REMOVER SET

    ST B 20099AE020 INSTALLER & REMOVER SET

    Fig 1: Pressing Bushing Into Trailing Link Using Installer
    G05342895Courtesy of SUBARU OF AMERICA, INC.