LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2008 >> Outback Base, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission (4AT) >> Reduction Drive Gear >> Assembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Reduction Drive Gear: Assembly

  1. Press-fit the reduction drive gear to shaft.
  2. Press-fit the new ball bearing into reduction drive gear.
  3. Apply vaseline onto the seal ring outer surface and shaft grooves.
  4. Apply ATF to new seal rings and install them.
    Fig 1: Identifying Reduction Drive Shaft And Seal Ring
    G05668412Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals