LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 114 (Airbag System) >> Passenger's Airbag Module >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Passenger's Airbag Module: Removal

WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Refer to "CAUTION" of "General Description" before handling the airbag module. <Ref. to CAUTION , General Descriptions .>
  1. Turn the ignition switch to OFF.
  2. Disconnect the ground cable from battery and wait for at least 20 seconds before starting work.
  3. Remove the instrument panel. <Ref. to INSTRUMENT PANEL (EXCLUDING STEERING SUPPORT BEAM) , REMOVAL, Instrument Panel Assembly .>
  4. Remove the claw, and remove the passenger's airbag module.
    Fig 1: Identifying Passenger Airbag Module With Claw
    G05343803Courtesy of SUBARU OF AMERICA, INC.
  5. Refer to "CAUTION" for handling of a removed airbag module. <Ref. to CAUTION , General Descriptions .>
scientia non olet · About LEMON Manuals