LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 117 (Lighting System) >> High-mounted Stop Light >> Removal >> Sedan Model
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Sedan Model

WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery.
  2. Push the high-mounted stop light towards the rear of the vehicle (1), raise the rear end (2) and remove the clips to remove the stop light
    Fig 1: Pushing High-Mounted Stop Light
    G05022497Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the harness from the clamp.
    Fig 2: Identifying Harness And Clamp
    G05343998Courtesy of SUBARU OF AMERICA, INC.
  4. Disengage two claws (A), pull out the high-mounted stop light from the cover and remove claw (B).
    Fig 3: Identifying High-Mounted Stop Light Claws
    G05022499Courtesy of SUBARU OF AMERICA, INC.
  5. Disengage the three claws and remove lens (A).
    Fig 4: Locating Claws And Lens
    G05022500Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the bulb.