Side Turn Signal Light Assembly: Removal

WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the ground cable from battery.
Remove the scalp cap. <Ref. to REPLACEMENT , Scalp Cap .>
Remove the mirror. <Ref. to REPLACEMENT , Outer Mirror .>
Disconnect the harness connector, remove the 3 mounting screws and then remove the side turn signal light assembly.

Fig 1: Locating Side Turn Signal Light Assembly Mounting Screws
Courtesy of SUBARU OF AMERICA, INC.