Front Fender

FRONT FENDER

REMOVAL

1. Disconnect the ground cable from the battery.
2. Remove the side sill spoilers.
3. Remove the front grille.
4. Remove the front bumper face.
5. Remove the headlight assembly.
6. Remove the mud guard.
7. Remove the cowl panel side.

8. Remove the bolt, and remove the front fender panel.

INSTALLATION

1. Install in the reverse order of removal.
2. Install with attention to make uniform clearance between front fender panel and front hood panel. For the dimension of clearance, refer to "SPECIFICATION" in "General Description".

Tightening torque: 7.5 N.m (0.76 kgf-m, 5.5 ft-lb)