LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2008 >> Tribeca Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Abs - Vehicle Dynamics Control (VDC) System >> Front ABS Wheel Speed Sensor >> Inspection >> Abs Wheel Speed Sensor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Abs Wheel Speed Sensor

  1. Check the tip of the ABS wheel speed sensor for foreign particles or damage. If necessary, clean the tip or replace the ABS wheel speed sensor.
  2. Connect a 12 V power supply to No. 2 terminal of sensor connector as shown in the figure, then attach resistance to the No. 1 terminal. Rotate the wheel at about 2.75 km/h (2 MPH), and measure the voltage using an oscilloscope.

    Standard value of output voltage: 

    0.7 - 1.4 V 

    Fig 1: Identifying Front ABS Wheel Speed Sensor And Oscilloscope
    G05664718Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals