Power Window Switch: Service and Repair

POWER WINDOW CONTROL SWITCH

REMOVAL

1. MAIN SWITCH
1. Disconnect the ground cable from battery.
2. Open the screw cover by using flat tip screwdriver.
3. Remove the screws and detach the power window main switch panel.







NOTE: Remove from the notched part at the edge of the switch panel.







4. Disconnect the main switch connector.
5. Remove the screws and remove the power window main switch assembly.

2. SUB-SWITCH
1. Open the screw cover by using flat tip screwdriver.
2. Remove the screws and detach the power window main switch panel.







NOTE: Remove from the notched part at the edge of the switch panel.







3. Disconnect the sub switch connector.
4. Remove the screws and remove the power window sub switch assembly.

INSTALLATION
Install in the reverse order of removal.