Outer Mirror Assembly: Inspection
Check to ensure that the outer mirror moves properly when the battery voltage is applied to terminals.
Model without mirror heater
TERMINAL SWITCH REFERENCE CHART
| Switch position | Terminal No. |
|---|---|
| OFF | - |
| UP | 4 (+) and 6 (-) |
| DOWN | 6 (+) and 4 (-) |
| LEFT | 5 (+) and 6 (-) |
| RIGHT | 6 (+) and 5 (-) |
| Folding | 1 (+) and 3 (-) |
| Unfolding | 3 (+) and 1 (-) |
If defective, replace the outer mirror.
Model with mirror heater
TERMINAL SWITCH REFERENCE CHART
| Switch position | Terminal No. |
|---|---|
| OFF | - |
| UP | 6 (+) and 8 (-) |
| DOWN | 8 (+) and 6 (-) |
| LEFT | 7 (+) and 8 (-) |
| RIGHT | 8 (+) and 7 (-) |
| Folding | 2 (+) and 5 (-) |
| Unfolding | 5 (+) and 2 (-) |
If defective, replace the outer mirror.
NOTE:
There always exists a current of 1.2 mA at the electric retraction terminal.