LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2010 >> Outback R >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System - Fuel Injection (Fuel Systems) (H6DO - 3.6L DOHC) >> Fuel Pump Control Unit >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Fuel Pump Control Unit: Removal

  1. Disconnect the ground cable from battery.
  2. Remove the trunk trim panel assembly-side RH. (Sedan model) Ref. to REMOVAL , Rear Quarter Trim.
  3. Remove the right side rear quarter trim. (OUTBACK model) Ref. to REMOVAL , Rear Quarter Trim.
  4. Remove the fuel pump control unit.
    • Sedan model
      Fig 1: Locating Fuel Pump Control Unit Screw (Sedan Model)
      G06651309Courtesy of SUBARU OF AMERICA, INC.
    • OUTBACK model
      Fig 2: Locating Fuel Pump Control Unit Screw (OUTBACK Model)
      G06651310Courtesy of SUBARU OF AMERICA, INC.
  5. Disconnect the connector from fuel pump control unit.
    • Sedan model
      Fig 3: Locating Fuel Pump Control Unit Connector (Sedan Model)
      G06651311Courtesy of SUBARU OF AMERICA, INC.
    • OUTBACK model
      Fig 4: Locating Fuel Pump Control Unit Connector (OUTBACK Model)
      G06651312Courtesy of SUBARU OF AMERICA, INC.