October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Control Valve Body: Inspection

Check each part for damage or dust.
Check oil strainer for clogging.
Measure the resistance of each solenoid.

NOTE: Measurement should be performed at a temperature of 20°C (68°F).

Fig 1: Identifying Solenoid Connector Terminals

G06654464

Courtesy of SUBARU OF AMERICA, INC.

SOLENOID SPECIFICATIONS

Solenoid	Terminal No.	Specification (Ω)
Secondary solenoid	No. 1 - control valve body	Approx. 6.6 Ω
Lock-up duty solenoid	No. 2 - control valve body	Approx. 12 Ω
F&R solenoid	No. 3 - control valve body	Approx. 5.3 Ω
Lock-up ON/OFF solenoid	No. 5 - control valve body	Approx. 16 Ω
Primary DOWN solenoid	No. 6 - control valve body	Approx. 12 Ω
Primary UP solenoid	No. 7 - control valve body	Approx. 12 Ω
AWD solenoid	No. 8 - control valve body	Approx. 3.2 Ω