LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2011 >> Forester X, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (Fuel Systems) (H4DO) >> Engine Coolant Temperature Sensor >> Removal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Engine Coolant Temperature Sensor: Removal

  1. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G07664703Courtesy of SUBARU OF AMERICA, INC.
  2. Drain engine coolant. < Ref. to DRAINING OF ENGINE COOLANT , REPLACEMENT. >
  3. Remove the air intake boot. < Ref. to REMOVAL , Air Intake Boot. >
  4. Disconnect the connector (A) from the engine coolant temperature sensor, and remove the engine coolant temperature sensor.
    Fig 2: Locating Engine Coolant Temperature Sensor Connector
    G07664704Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals