LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2011 >> Legacy Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 112 (Lighting System) >> Day Time Running Resistor >> Removal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Day Time Running Resistor: Removal

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front bumper face assembly. Refer to FRONT BUMPER .
  2. Remove the daytime running resistor.
    1. Disconnect the connector.
    2. Remove the bolt, and remove the daytime running resistor.
      Fig 1: Locating Daytime Running Resistor Bolt
      G06653507Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals