LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2011 >> Outback R Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 114 (Vehicle Dynamics Control) >> Front ABS Wheel Speed Sensor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front ABS Wheel Speed Sensor: Installation

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Be careful not to damage the sensor.

Install each part in the reverse order of removal.

NOTE:
  • Check the identification (mark) on the harness to make sure there is no warpage. Refer to , SPECIFICATION , General Description.
  • Check if the harness is not pulled and does not come in contact with the suspension or body while operating the steering.

Tightening torque: 

Front ABS wheel speed sensor: 7.5 N.m (0.76 kgf-m, 5.5 ft-lb)