Front Disc Rotor: Installation

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Before installation, remove mud and foreign matter from the caliper body assembly.

Before installation, check the front disc rotor. Refer to , INSPECTION , Front Disc Rotor.
Install each part in the reverse order of removal.

Tightening torque:

Brake hose bracket: 33 N.m (3.36 kgf-m, 24.3 ft-lb)

Mounting bolt: 120 N.m (12.24 kgf-m, 88.5 ft-lb)