LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2011 >> Outback R >> Repair and Diagnosis >> External Pages >> Different car >> Section 108 (LAN System Diagnostics) >> CAN Communication Circuit Check >> List
April 5, 2026: LEMON Manuals is launched! Read the announcement.

CAN Communication Circuit Check: List

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
Resistance value between CAN Hi And Lo Contents of inspection Remarks
Ground short inspection Refer to , GROUND SHORT INSPECTION , INSPECTION, CAN Communication Circuit Check. Shorted to ground in the communication circuit or control module.
Battery short inspection Refer to , BATTERY SHORT INSPECTION , INSPECTION, CAN Communication Circuit Check. Shorted to battery power supply in the communication circuit or control module.
56 - 64 Ω Refer to , 56 - 64 Ω , INSPECTION, CAN Communication Circuit Check. Combined resistance of end resistance does not have malfunction; short to ground or +B short of the CAN communication circuit is possible, however.
55 Ω or less Refer to , 55 Ω OR LESS , INSPECTION, CAN Communication Circuit Check. Omega; OR LESS, INSPECTION, CAN Communication Circuit Check. Resistance is lower than combined resistance of end resistance. Short to CAN Hi and CAN Lo on the CAN communication circuit is possible.
65 Ω or more Refer to , 65 Ω OR MORE , INSPECTION, CAN Communication Circuit Check. Omega; OR MORE, INSPECTION, CAN Communication Circuit Check. Resistance is higher than combined resistance of end resistance. Open circuit of CAN communication circuit is possible.
56 - 64 Ω (TCM) Refer to , 56 - 64 Ω (TCM) , INSPECTION, CAN Communication Circuit Check. No TCM data is received. Perform inspection when faulty is detected.
56 - 64 Ω (Steering angle sensor) Refer to , RELATED LINES 56 - 64 Ω (STEERING ANGLE SENSOR) , INSPECTION, CAN Communication Circuit Check. No other data is received. Perform inspection when faulty is not detected.
56 - 64 Ω (A/C CM) Refer to , 56 - 64 Ω (A/C CM) , INSPECTION, CAN Communication Circuit Check. No A/C data is received. Perform inspection when faulty is detected.
56 - 64 Ω (Electronic parking CM) Refer to , 56 - 64 Ω (ELECTRONIC PARKING CM) , INSPECTION, CAN Communication Circuit Check. No EPB data is received. Perform inspection when faulty is detected.
56 - 64 Ω (Combination meter) Refer to , 56 - 64 Ω (COMBINATION METER) , INSPECTION, CAN Communication Circuit Check. No meter data is received. Perform inspection when faulty is detected.
56 - 64 Ω (Security CM) Refer to , 56 - 64 Ω (SECURITY CM) , INSPECTION, CAN Communication Circuit Check. No security CM data is received. Perform inspection when faulty is detected.