LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2011 >> Outback R >> Repair and Diagnosis >> External Pages >> Different car >> Section 114 (Vehicle Dynamics Control) >> Front ABS Wheel Speed Sensor >> Inspection >> Check With SUBARU Select Monitor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Check With SUBARU Select Monitor

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the Subaru Select Monitor to data link connector.
    1. Run the "PC application for Subaru Select Monitor".
    2. On << Main Menu >> display, select {Each System Check}.
    3. Select {Brake Control System}. When {VDC} is displayed, select the (OK) button.
    4. From {Current Data Display & Save}, select {FR Wheel Speed} and {FL Wheel Speed}.
  2. Check if the speed indicated on the display changes in the same manner as the speedometer reading during acceleration/deceleration when the steering wheel is in the straight-ahead position.
  3. If the speed indicated on the display does not change in the inspection, check the ABS wheel speed sensor. Refer to , CHECK ABS WHEEL SPEED SENSOR UNIT. , INSPECTION, Front ABS Wheel Speed Sensor.
scientia non olet · About LEMON Manuals