Rearview Mirror (RCD Model): Installation

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: When tightening the mounting TORX® bolt, be sure to observe the specified torque. Otherwise, the mount may be damaged in over-torque conditions.

Install each part in the reverse order of removal.
Perform calibration and zone setting of the rearview mirror (RCD). Refer to , ADJUSTMENT , Rearview Mirror (RCD Model).

Tightening torque:

Refer to "COMPONENT" of "General Description". Refer to , MIRROR , COMPONENT, General Description.