Rear Disc Rotor: Installation

WARNING: This page is about a different car, the 2012 Subaru Outback and 2012 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Before installation, remove mud and foreign matter from the caliper body assembly.

Before installation, check the rear disc rotor. Refer to , INSPECTION , Rear Disc Rotor.
Install each part in the reverse order of removal.
Adjust the parking brake. Refer to PARKING BRAKE ASSEMBLY (REAR DISC BRAKE) .

Tightening torque:

Brake hose bracket: 33 N.m (3.36 kgf-m, 24.3 ft-lb)

Mounting bolt: 66 N.m (6.73 kgf-m, 48.7 ft-lb)