LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2012 >> Forester X Premium, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Automatic Transmission) >> Reduction Driven Gear >> Installation
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Reduction Driven Gear: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Set the range select lever to the "P" range.
  2. Using a plastic hammer, install the reduction driven gear assembly and the new washer, and tighten the drive pinion lock nut.
    NOTE: Use a new washer and lock nut.

    Tightening torque: 

    100 N.m (10.2 kgf-m, 73.8 ft-lb) 

    Fig 1: Tightening Drive Pinion Lock Nut
    G07665611Courtesy of SUBARU OF AMERICA, INC.
  3. After tightening, stake the lock nut securely.
  4. Connect the transmission case with the extension case. < Ref. to INSTALLATION , Extension Case. >
  5. Install the transmission assembly to the vehicle. < Ref. to INSTALLATION , Automatic Transmission Assembly. >
scientia non olet · About LEMON Manuals