Clutch Fluid: Replacement
WARNING: This page is about a different variant/trim than selected.
CAUTION:
- Use new FMVSS No. 116 DOT3 or DOT4.
- Cover the air breather with cloth to prevent clutch fluid from being splashed on surrounding parts when loosening the breather.
- Avoid mixing clutch fluid of different brands to prevent fluid performance from degrading.
- Be careful not to allow dirt or dust to enter the reservoir tank.
NOTE:
- During bleeding operation, keep the reservoir tank filled with clutch fluid to prevent entry of air.
- Clutch pedal must be operated very slowly.
- Bleed air from the oil line with help of a co-worker.
- The amount of clutch fluid required is approximately 70 m l (2.4 US fl oz, 2.5 lmp fl oz) for total clutch system.
- Remove the air intake boot assembly. < Ref. to REMOVAL , Air Intake Boot . >
- Drain the clutch fluid from the reservoir tank.
- Refill the reservoir tank with recommended clutch fluid.
Recommended clutch fluid:
New FMVSS No. 116 DOT3 or DOT4
- If necessary, bleed air from the clutch fluid. < Ref. to CLUTCH FLUID AIR BLEEDING . >