LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2012 >> Outback Base, Automatic CVT Trans >> Repair and Diagnosis (Single Page) >> Electrical >> Charging Systems >> Starting/Charging Systems (H4SO) >> Battery >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Starting/Charging Systems (H4SO): Battery: Removal

  1. After disconnecting the battery ground terminal, remove the terminal cover, then disconnect the positive terminal.
  2. Remove the battery cable holder from the battery rod.
  3. Remove flange nut from the battery rod and remove battery holder.
    Fig 1: Locating Flange Nut On Battery Rod
    G06648717Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the battery.
scientia non olet · About LEMON Manuals