LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2012 >> Outback Base, Automatic CVT Trans >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security And Locks >> Ignition Key Lock >> Replacement
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Ignition Key Lock: Replacement

  1. Disconnect the ground cable from battery.
  2. Remove the steering column. Refer to STEERING COLUMN .
  3. Remove the ignition key lock.
    1. Secure the steering column in a vise.
    2. Drill out the bolts and remove the ignition key lock.
      Fig 1: Locating Ignition Key Lock Bolt
      G06653927Courtesy of SUBARU OF AMERICA, INC.
  4. Install the ignition key lock.
    1. Secure the ignition key lock to the steering column.
    2. Use new bolts. Tighten the bolt until the bolt head is broken (bolt head wrenched off).
scientia non olet · About LEMON Manuals