LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2012 >> Outback Base, Standard Trans >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting System >> Spot Map Light >> Inspection >> Spot Map Light Switch
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Spot Map Light Switch

  1. Remove the overhead console assembly.
  2. Measure the resistance between spot map light switch terminals.

    Preparation tool: Circuit tester 

    Fig 1: Measuring Resistance Between Spot Map Light Switch Terminals
    G07916124Courtesy of SUBARU OF AMERICA, INC.
    Terminal No. Inspection Conditions Specification
    - Switch OFF 1 MΩ or more
    6 - 5 Switch ON Less than 1 Ω
    6 - 7 Switch door Less than 1 Ω
  3. Replace the overhead console assembly if the inspection result is not within the standard value.
scientia non olet · About LEMON Manuals