 Courtesy of SUBARU OF AMERICA, INC.
|
398477701 |
HANDLE |
Used for installing the front and rear bearing cones. |
 Courtesy of SUBARU OF AMERICA, INC.
|
398477702 |
DRIFT |
- Used for press-fitting the bearing race of differential carrier (front). (T-type)
- Used for press-fitting bearing race of differential carrier (rear). (VA1-type)
- Used for press-fitting side bearing race. (VA1-type)
|
 Courtesy of SUBARU OF AMERICA, INC.
|
398217700 |
ATTACHMENT SET |
Stand for rear differential carrier disassembly and assembly. |
 Courtesy of SUBARU OF AMERICA, INC.
|
498447120 |
INSTALLER |
Used for installing the front oil seal. |
 Courtesy of SUBARU OF AMERICA, INC.
|
498427200 |
FLANGE WRENCH |
Used for stopping rotation of companion flange when removing and tightening self-lock nut. |
 Courtesy of SUBARU OF AMERICA, INC.
|
398467700 |
DRIFT |
- Used for removing pinion, pilot bearing and rear bearing cone.
- For T-type and VA1-type
|
 Courtesy of SUBARU OF AMERICA, INC.
|
399780104 |
WEIGHT |
Used for installing the front bearing cone and the pilot bearing and the companion flange. |
 Courtesy of SUBARU OF AMERICA, INC.
|
899580100 |
INSTALLER |
Used for press-fitting the front bearing cone and pilot bearing. |
 Courtesy of SUBARU OF AMERICA, INC.
|
899904100 |
STRAIGHT PIN REMOVER |
Used for removing the spring pin of the differential pinion shaft. |
 Courtesy of SUBARU OF AMERICA, INC.
|
498247001 |
MAGNET BASE |
- Used for measuring backlash between side gear and pinion, and hypoid gear.
- Used together with DIAL GAUGE (498247100).
|
 Courtesy of SUBARU OF AMERICA, INC.
|
498247100 |
DIAL GAUGE |
- Used for measuring backlash between side gear and pinion, and hypoid gear.
- Used together with MAGNET BASE (498247001).
|
 Courtesy of SUBARU OF AMERICA, INC.
|
398507704 |
BLOCK |
- Used for adjusting pinion height and preload.
- For T-type and VA1-type
|
 Courtesy of SUBARU OF AMERICA, INC.
|
398177700 |
INSTALLER |
- Used for installing the rear bearing cone.
- For T-type and VA2-type
|
 Courtesy of SUBARU OF AMERICA, INC.
|
398457700 |
ATTACHMENT |
- Used for removing the side retainer.
- For T-type
|
 Courtesy of SUBARU OF AMERICA, INC.
|
398477703 |
DRIFT 2 |
- Used for press-fitting bearing race (rear) of differential carrier.
- For T-type and VA2-type
|
 Courtesy of SUBARU OF AMERICA, INC.
|
398437700 |
DRIFT |
- Used for installing the side oil seal.
- For T-type and VA2-type
|
 Courtesy of SUBARU OF AMERICA, INC.
|
398507702 |
DUMMY SHAFT |
- Used for adjusting pinion height and preload.
- For T-type
|
 Courtesy of SUBARU OF AMERICA, INC.
|
398507703 |
DUMMY COLLAR |
- Used for adjusting pinion height and preload.
- For T-type
|
 Courtesy of SUBARU OF AMERICA, INC.
|
398517700 |
REPLACER |
- Used for removing rear bearing cone.
- For T-type and VA2-type
|
 Courtesy of SUBARU OF AMERICA, INC.
|
398487700 |
DRIFT |
- Used for press-fitting side bearing cone.
- For T-type and VA2-type
|
 Courtesy of SUBARU OF AMERICA, INC.
|
398507701 |
DIFFERENTIAL CARRIER GAUGE |
- Used for adjusting pinion height.
- For T-type
|
 Courtesy of SUBARU OF AMERICA, INC.
|
398527700 |
PULLER ASSY |
- Used for removing the front and side oil seals.
- Used for removing side bearing cup. (T-type)
|
 Courtesy of SUBARU OF AMERICA, INC.
|
398417700 |
DRIFT |
- Used for installing side bearing race.
- For T-type and VA2-type
|
 Courtesy of SUBARU OF AMERICA, INC.
|
28099PA090 |
OIL SEAL PROTECTOR |
- Used for installing the rear drive shaft to the rear differential.
- For oil seal protection
|
 Courtesy of SUBARU OF AMERICA, INC.
|
28099PA100 |
DRIVE SHAFT REMOVER |
- Used for removing the rear drive shaft from rear differential.
- For T-type
|
 Courtesy of SUBARU OF AMERICA, INC.
|
399703600 |
PULLER ASSY |
Used for removing companion flange. |
 Courtesy of SUBARU OF AMERICA, INC.
|
899874100 |
INSTALLER |
Used for installing the companion flange. |
 Courtesy of SUBARU OF AMERICA, INC.
|
498077000 |
REMOVER |
- Used for removing the differential side bearing cone.
- For VA2-type
|
 Courtesy of SUBARU OF AMERICA, INC.
|
899864100 |
REMOVER |
Used for removing the differential side bearing. |
 Courtesy of SUBARU OF AMERICA, INC.
|
499277200 |
INSTALLER |
- Used for installing the front bearing cone.
- For VA2-type
|
 Courtesy of SUBARU OF AMERICA, INC.
|
18758AA000 |
PULLER |
- Used for removing side bearing cup.
- For VA2-type
|
 Courtesy of SUBARU OF AMERICA, INC.
|
18759AA000 |
PULLER ASSY |
- Used for removing the differential side bearing cone.
- For T-type
|
 Courtesy of SUBARU OF AMERICA, INC.
|
18678AA000 |
DUMMY SHAFT |
- Used for adjusting pinion height and preload.
- For VA2-type
|
 Courtesy of SUBARU OF AMERICA, INC.
|
18831AA010 |
DIFFERENTIAL CARRIER GAUGE |
- Used for adjusting pinion height.
- For VA2-type
|
 Courtesy of SUBARU OF AMERICA, INC.
|
18630AA010 |
WRENCH COMPL RETAINER |
- Used for removing and installing the side oil seal holder.
- For VA-type
- WRENCH ASSY (499787000) can also be used.
|
 Courtesy of SUBARU OF AMERICA, INC.
|
498175500 |
INSTALLER |
- Used for installing the rear bearing cone.
- For VA1-type
|
 Courtesy of SUBARU OF AMERICA, INC.
|
498447100 |
INSTALLER |
- Used for installing the oil seal.
- For VA1-type
|
 Courtesy of SUBARU OF AMERICA, INC.
|
399520105 |
SEAT |
- Used for removing the side bearing cone.
- Used together with PULLER SET (899524100).
- For VA-type
|
 Courtesy of SUBARU OF AMERICA, INC.
|
899524100 |
PULLER SET |
- Used for removing the differential side bearing cone.
- For VA-type
- Puller
- Cap
|
 Courtesy of SUBARU OF AMERICA, INC.
|
498485400 |
DRIFT |
- Used for installing side bearing cone.
- For VA1-type
|
 Courtesy of SUBARU OF AMERICA, INC.
|
498505501 |
DIFFERENTIAL CARRIER GAUGE |
- Used for adjusting pinion height.
- For VA1-type
|
 Courtesy of SUBARU OF AMERICA, INC.
|
498447110 |
DRIFT |
- Used for press-fitting the bearing race (front) of the differential carrier.
- For VA1-type
|
 Courtesy of SUBARU OF AMERICA, INC.
|
498447150 |
DUMMY SHAFT |
- Used for adjusting pinion height and preload.
- For VA1-type
|
 Courtesy of SUBARU OF AMERICA, INC.
|
498515500 |
REPLACER |
- Used for removing rear bearing cone.
- For VA1-type
|
 Courtesy of SUBARU OF AMERICA, INC.
|
499705404 |
SEAT |
- Used for removing the side bearing race.
- Used together with PULLER ASSY (499705401).
- For VA1-type
|
 Courtesy of SUBARU OF AMERICA, INC.
|
499705401 |
PULLER ASSY |
- Used for removing the side bearing race.
- Used together with SEAT (499705404).
- For VA-type
|
 Courtesy of SUBARU OF AMERICA, INC.
|
18270KA020 |
SOCKET (E20) |
- Used for removing and installing the hypoid driven gear.
- For VA2-type
|
 Courtesy of SUBARU OF AMERICA, INC.
|
18854AA000 |
ANGLE GAUGE |
- Used for installing the hypoid driven gear.
- For VA2-type
|
 Courtesy of SUBARU OF AMERICA, INC.
|
41399FG001 |
SPECIAL TOOL ASSY |
- Used for removing and installing the rear differential mount bushing.
- Use (1), (3), (5), (6), (7), (8) and (9) for removal.
- Use (2), (4), (5), (6), (7), (8) and (9) for installation. (1) SPECIAL TOOL A (41399FG010)
- SPECIAL TOOL B (41399FG020)
- SPECIAL TOOL C (41399FG031)
- SPECIAL TOOL D (41399FG041)
- SPECIAL TOOL SLEEVE (41399FG050)
- SPECIAL TOOL RING (41399FG061)
- SPECIAL TOOL NUT (41399FG070)
- SPECIAL TOOL BEARING (41399FG080)
- SPECIAL TOOL SHAFT (41399FG091)
|
 Courtesy of SUBARU OF AMERICA, INC.
|
41399FG010 |
SPECIAL TOOL A |
- Used for removing the rear differential mount bushing.
- For combination of tools for removal, refer to "SPECIAL TOOL ASSY (41399FG001)".
|
 Courtesy of SUBARU OF AMERICA, INC.
|
41399FG020 |
SPECIAL TOOL B |
- Used for installing the rear differential mount bushing.
- For combination of tools for installation, refer to "SPECIAL TOOL ASSY (41399FG001)".
|
 Courtesy of SUBARU OF AMERICA, INC.
|
41399FG031 |
SPECIAL TOOL C |
- Used for removing the rear differential mount bushing.
- For combination of tools for removal, refer to "SPECIAL TOOL ASSY (41399FG001)".
|
 Courtesy of SUBARU OF AMERICA, INC.
|
41399FG041 |
SPECIAL TOOL D |
- Used for installing the rear differential mount bushing.
- For combination of tools for installation, refer to "SPECIAL TOOL ASSY (41399FG001)".
|
 Courtesy of SUBARU OF AMERICA, INC.
|
41399FG050 |
SPECIAL TOOL SLEEVE |
- Used for removing and installing the rear differential mount bushing.
- For combination of tools for removal and installation, refer to "SPECIAL TOOL ASSY (41399FG001)".
|
 Courtesy of SUBARU OF AMERICA, INC.
|
41399FG061 |
SPECIAL TOOL RING |
- Used for removing and installing the rear differential mount bushing.
- For combination of tools for removal and installation, refer to "SPECIAL TOOL ASSY (41399FG001)".
|
 Courtesy of SUBARU OF AMERICA, INC.
|
41399FG070 |
SPECIAL TOOL NUT |
- Used for removing and installing the rear differential mount bushing.
- For combination of tools for removal and installation, refer to "SPECIAL TOOL ASSY (41399FG001)".
|
 Courtesy of SUBARU OF AMERICA, INC.
|
41399FG080 |
SPECIAL TOOL BEARING |
- Used for removing and installing the rear differential mount bushing.
- For combination of tools for removal and installation, refer to "SPECIAL TOOL ASSY (41399FG001)".
|
 Courtesy of SUBARU OF AMERICA, INC.
|
41399FG091 |
SPECIAL TOOL SHAFT |
- Used for removing and installing the rear differential mount bushing.
- For combination of tools for removal and installation, refer to "SPECIAL TOOL ASSY (41399FG001)".
|
 Courtesy of SUBARU OF AMERICA, INC.
|
41399YC000 |
SOCKET WRENCH (17) |
Used for tightening the self-locking nut. |
 Courtesy of SUBARU OF AMERICA, INC.
|
1B022XU0 |
SUBARU SELECT MONITOR III KIT |
Used for troubleshooting the electrical system. |