Reduction Driven Gear: Disassembly

WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.

Remove the ball bearing from reduction driven gear using ST.
ST 498077300 REMOVER

Fig 1: Removing Ball Bearing Using ST
Courtesy of SUBARU OF AMERICA, INC.
Remove the ball bearing on the reverse side with the same procedure as step 1).
ST 498077300 REMOVER

Fig 2: Identifying Ball Bearing
Courtesy of SUBARU OF AMERICA, INC.
Remove the snap ring of the parking gear.

Fig 3: Identifying Snap Ring
Courtesy of SUBARU OF AMERICA, INC.
Using the ST, remove the parking gear.
ST 18767AA000 REMOVER

Fig 4: Identifying Parking Gear Remover
Courtesy of SUBARU OF AMERICA, INC.