Rearview Mirror (RCD Model): Removal

WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the ground cable from battery.
Remove the harness cover (a) and connector cap (b).

Fig 1: Identifying Rearview Mirror Components (RCD Model)
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the harness connector.
Remove the TORX® screw (1).
Slide the rearview mirror (2) to the upper side (A) of windshield glass (3), and remove the mirror from the mount (4).
CAUTION:
- Be careful not to damage the mirror surface.
- Be careful not to damage the windshield glass.
Fig 2: Identifying Rearview Mirror Components (RCD Model)
Courtesy of SUBARU OF AMERICA, INC.