Glass Lid: Removal

WARNING: This page is about a different car, the 2011 Subaru Tribeca. However, it is still accessible from the selected car via links, so may be relevant.

Completely close the glass lid, and then open the sunshade.
Remove the cover (A), and then remove the TORX® bolts (B).
CAUTION: The thread locker is applied to the TORX® bolts, so use the new parts once they are removed.

Fig 1: Identifying Glass Lid Cover And TORX® Bolts
Courtesy of SUBARU OF AMERICA, INC.
Remove the glass lid carefully.