Section 11 (Starting/Charging Systems (H4SO)): Starter: Removal

1. Disconnect the ground cable from battery.
   Fig 1: Disconnecting Ground Cable From Battery

   Courtesy of SUBARU OF AMERICA, INC.
2. Remove the air intake boot assembly. (non-turbo model) Refer to AIR INTAKE BOOT . Refer to AIR INTAKE BOOT .
3. Remove the intercooler. (turbo model) Refer to INTERCOOLER .
4. Disconnect connector (B) and terminal (A) from starter.
   Fig 2: Identifying Starter Connector And Starter Terminal

   Courtesy of SUBARU OF AMERICA, INC.
5. Remove the starter from transmission.

NOTE: For the MT model, a bolt is used in place (A).

Fig 3: Identifying Starter Mounting Bolt (View 1 Of 2)

Courtesy of SUBARU OF AMERICA, INC.