Read Diagnostic Trouble Code (DTC): Operation

Using the Subaru Select Monitor, on the «Main Menu» display, select {Each System Check}.
On «Each System Check Menu» display, select {Transmission Control System}.
After transmission type information is displayed, select [OK].
On «Transmission Diagnosis» display, select {Diagnostic Code(s) Display}.
On «Diagnostic Code(s) Display» display, select {Temporary Diagnostic Code(s)} or {Memorized Diagnostic Code(s)}.

NOTE:

For details concerning the work procedure, refer to the "PC application help for Subaru Select Monitor".
For details concerning DTC, refer to List of Diagnostic Trouble Code (DTC). < Refer to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) . >