October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Impact Sensor Setting Using SUBARU Select Monitor
- Prepare the Subaru Select Monitor kit.
- Turn the ignition switch to ON (engine OFF) and run the "PC application for Subaru Select Monitor".
- On «System Selection Menu» display, select {Integ. unit mode}.
- Select {Unit customizing}.
- Make an impact monitor setting.
- When installing: ON
- When removing: OFF
- Make a impact monitor ON/OFF setting.
- When installing: ON
- When removing: OFF
- Turn the ignition switch to OFF, and then remove the Subaru Select Monitor.