LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2013 >> Outback Base, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Automatic Transaxle) >> Turbine Speed Sensor 1 >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Turbine Speed Sensor 1: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the ground cable from battery.
  2. Lift up the vehicle.
  3. Remove the front exhaust pipe. Refer to REMOVAL .
  4. Disconnect the turbine speed sensor 1 connector.
    Fig 1: Identifying Turbine Speed Sensor 1 Connector
    G06652012Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the turbine speed sensor 1.
scientia non olet · About LEMON Manuals