Secondary Pressure Sensor: Inspection
- Remove the instrument panel lower cover. Refer to REMOVAL .
- Start and warm up the engine.
- Shift the select lever to "P" or "N" range.
- Depress the brake pedal and hold it.
- Check "secondary pressure sensor voltage" by using Subaru Select Monitor while the engine is idling. Refer to
OPERATION
.
Standard
Approx. 0.8 V
- Check "secondary pressure sensor voltage" with engine stopped and ignition switch turned on by using Subaru Select Monitor. Refer to
OPERATION
.
Specification:
Approx. 0.5 V