LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2013 >> Outback Base, Standard Trans >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting System >> Light Control Sensor >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Light Control Sensor: Removal

NOTE: The light control sensor is integrated with the sunload sensor.
  1. Disconnect the ground cable from battery.
  2. Remove the light control sensor.
    CAUTION: Be careful not to damage the sensors and interior trims when removing.
    1. Release the claws and clips, then detach the side speaker cover (RH).
      Fig 1: Identifying Side Speaker Cover (RH)
      G06653427Courtesy of SUBARU OF AMERICA, INC.
    2. Push out the light control sensor by pressing the left and right claws.
    3. Disconnect the connector, and remove the light control sensor.
      Fig 2: Removing Light Control Sensor
      G06653428Courtesy of SUBARU OF AMERICA, INC.