Extension Case: Installation
WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
- Apply vaseline to the contact surface, and attach the selected thrust needle bearing to the end surface of the reduction drive gear.NOTE: Install the thrust needle bearing in the correct direction.
- Install a new gasket.
- Install the extension case to transmission case.
- Tighten bolts to secure the extension case.
Tightening torque:
25 N.m (2.5 kgf-m, 18.4 ft-lb)
- Install the transmission assembly. < Refer to INSTALLATION , Automatic Transmission Assembly. >