Reduction Driven Gear: Assembly

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Install the snap ring to the gear inner grove on the reduction driven gear.
Install the ball bearing to the reduction driven gear using a press.
NOTE: Use a new ball bearing.

Fig 1: Identifying Ball Bearing
Courtesy of SUBARU OF AMERICA, INC.
Install the snap ring to reduction driven gear.

Fig 2: Installing Snap Ring To Reduction Driven Gear
Courtesy of SUBARU OF AMERICA, INC.