Transfer Clutch: Installation

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Select the thrust needle bearing. < Refer to ADJUSTMENT , Transfer Clutch. >
Install the transfer clutch assembly to the extension case.

Fig 1: Identifying Transfer Clutch Assembly And Extension Case
Courtesy of SUBARU OF AMERICA, INC.
Tighten bolts to secure the extension case.
NOTE: Use a new gasket.

Tightening torque:

25 N.m (2.5 kgf-m, 18.4 ft-lb)

Fig 2: Identifying Extension Case Mounting Bolts
Courtesy of SUBARU OF AMERICA, INC.
Install the transmission assembly to the vehicle. < Refer to INSTALLATION , Automatic Transmission Assembly. >