LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2013 >> Outback Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Lighting System) >> Headlight and Tail Light System >> Inspection >> Headlight Relay
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Headlight Relay

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect terminal No. 4 to the battery positive terminal and the terminal No. 3 to the battery negative terminal, and check the resistance value between the headlight relay terminals.
    Fig 1: Identifying Headlight Relay Terminals
    G08543006Courtesy of SUBARU OF AMERICA, INC.
    Continuity Terminal No. Standard
    Yes 1 and 2 Less than 1 Ω
    No 1 MΩ or more
  2. Replace the headlight relay if the inspection result is not within the standard value.
scientia non olet · About LEMON Manuals