License Plate Light: Removal

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the ground cable from battery.
Remove the screw and remove the license light cover.

Fig 1: Locating License Light Cover Screws
Courtesy of SUBARU OF AMERICA, INC.
Remove the bulb.

Fig 2: Locating Bulb
Courtesy of SUBARU OF AMERICA, INC.
Remove the rear gate trim. < Refer to REMOVAL , Rear Gate Trim. >
Remove the license plate light assembly harness.