Spot Map Light: Removal

WARNING: This page is about a different car, the 2013 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The spot map light is a single unit with the overhead console.

Disconnect the ground cable from battery.
Push and open the rear end of the overhead console lid, and remove the screws.

Fig 1: Locating Spot Map Light Screws
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the harness connector and remove the overhead console assembly.
Remove the spot map light lens.

Fig 2: Removing Spot Map Light Lens
Courtesy of SUBARU OF AMERICA, INC.
Remove the bulb.

Fig 3: Locating Bulb
Courtesy of SUBARU OF AMERICA, INC.