Section 12 (Starting System & Charging System (H6DO)): Starter: Installation

Install in the reverse order of removal.

Tightening torque: 50 N.m (5.1 kgf-m, 36.9 ft-lb) 

Fig 1: Identifying Starter Connector And Terminal Mounting Nut And Bolt

Courtesy of SUBARU OF AMERICA, INC.

Tightening torque: 10 N.m (1.0 kgf-m, 7.4 ft-lb) 

Fig 2: Locating Starter Terminal Nut

Courtesy of SUBARU OF AMERICA, INC.

Tightening torque: 

Clamp (A) 3 N.m (0.3 kgf-m, 2.2 ft-lb) 

Bolt (B) 6.5 N.m (0.7 kgf-m, 4.8 ft-lb) 

Fig 3: Identifying Air Intake Boot Assembly Clamp And Bolt

Courtesy of SUBARU OF AMERICA, INC.