LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2013 >> Outback Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Continuously Variable Transaxle (CVT)) >> Secondary Speed Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Secondary Speed Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
CAUTION:
  • Be sure to prevent water or oil from contacting the connector terminal of secondary speed sensor. If adhesion occurs, replace with a new part.
  • When secondary speed sensor is removed, CVTF leaks. After installing the secondary speed sensor, adjust the CVTF level.
  1. Lift up the vehicle.
  2. Remove the harness connector from secondary speed sensor.
  3. Remove the secondary speed sensor.
    Fig 1: Locating Secondary Speed Sensor Mounting Bolt
    G08317800Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals