Navigation Assembly: Installation
- Install the navigation bracket No. 1.
- Install the navigation bracket No. 1 onto the navigation ASSY and fasten the four screws.
- Install the navigation bracket No. 2.NOTE: Perform the same procedure as with the navigation bracket No. 1.
- Install the navigation ASSY.
- Connect each connector.
- Install the navigation ASSY in place with the four bolts.
- Install the instrument cluster finish panel SUB-ASSY CTR. (Refer to INSTALLATION )
- Connection of the battery ground terminal
Standard value: T=6.0N.m {61kgf.cm} {4.4 ft.lbf}
- Settings when connecting/disconnecting battery terminals (Refer to SETTING PROCEDURES AT PARTS REPLACEMENT AND REMOVAL/INSTALLATION )