LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2014 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System (Service Information) >> Knock Control Sensor (FA20) >> Unit Inspection
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Unit Inspection

  1. Inspection of knock control sensor
    1. Measure the resistance between the terminals.
      RESISTANCE

      Inspection terminals Inspection conditions Standard value
      1 - 2 20°C {68°F} 532 to 588 kΩ
      Fig 1: Identifying Knock Control Sensor Connector Terminals
      G08554048Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals