Unit Inspection
- Transmission wire (oil temperature sensor) check
- Measure the resistance between the terminals.RESISTANCE
Inspection terminals Inspection conditions Standard value 9(OIL) - 1(E2) Always 79 Ωto156 k Ω 9 (OIL) - chassis ground Always 10 k Ωor more 1 (E2) - chassis ground Always 10 k Ωor more NOTE: If the resistance is out of the oil temperature range in the table below, the handling performance of the vehicle may be degraded.RESISTANCEOil temperature Standard value 10°C (50°F) 5 to 8 k Ω 25°C (77°F) 2.5 to 4.5 k Ω 110°C (230°F) 0.22 to 0.28 k Ω
- Measure the resistance between the terminals.