Tumble Generator Valve Assembly: Removal

Release the fuel pressure. < Ref. to RELEASING OF FUEL PRESSURE , PROCEDURE, Fuel. >
Disconnect the ground cable from battery.
Open the fuel filler lid and remove the fuel filler cap.
Remove the intake manifold. < Ref. to REMOVAL , Intake Manifold. >
Disconnect the connector (A) from the tumble generator valve assembly.
Remove the tumble generator valve assembly from the cylinder head.
- RH side
  
  Fig 1: Locating Tumble Generator Valve Assembly Connector Bolts (RH)
  Courtesy of SUBARU OF AMERICA, INC.
- LH side
  
  Fig 2: Locating Tumble Generator Valve Assembly Connector Bolts (RH)
  Courtesy of SUBARU OF AMERICA, INC.
Remove the cylinder head plate from cylinder head.

Fig 3: Locating Cylinder Head Plate
Courtesy of SUBARU OF AMERICA, INC.