Front ABS Wheel Speed Sensor: Installation

WARNING: This page is about a different car, the 2014 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

Be careful not to damage the sensor.
Do not apply excessive force to the sensor harness.

Install each part in the reverse order of removal.

NOTE:

Check the identification (mark) on the harness to make sure there is no warpage. < Ref. to SPECIFICATION , General Description. >
Check if the harness is not pulled and does not come in contact with the suspension or body while operating the steering.

Tightening torque:

Front ABS wheel speed sensor: 7.5 N.m (0.76 kgf-m, 5.5 ft-lb)

Front ABS wheel speed sensor bracket: 33 N.m (3.36 kgf-m, 24.3 ft-lb)

Front wheel: 120 N.m (12.24 kgf-m, 88.5 ft-lb)