Rear Height Sensor: Installation
WARNING: This page is about a different car, the 2014 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Do not apply impact to the sensor assembly - headlight beam leveler or forcibly move the arm. Doing so may cause sensor damage and malfunction.
- Install each part in the reverse order of removal.
Tightening torque:
Sensor assembly - headlight beam leveler: 7.5 N.m (0.76 kgf-m, 5.5 ft-lb)
Rear wheel: 120 N.m (12.24 kgf-m, 88.5 ft-lb)
- Perform reinitialization of the sensor assembly - headlight beam leveler. < Ref. to
REINITIALIZATION , PROCEDURE, Auto Headlight Beam Leveler System. >NOTE: When replacing the sensor assembly - headlight beam leveler with a new part, perform the initialization. < Ref. to INITIALIZATION , PROCEDURE, Auto Headlight Beam Leveler System. >